Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Slide 31
Slide 32
Slide 33
Slide 34
Slide 35
Slide 36
Slide 37
Slide 38
Slide 39
Slide 40
Slide 41
Slide 42
Slide 43
Slide 44
Product List
In battery meter mode, the system measures the battery voltage and slowly blinks an LED to indicate the approximate battery life remaining. If the MAX LED is blinking, then the battery is fully charged. If the MIN LED is blinking, then the battery is nearly depleted and it is time to replace the battery. From the slider demo mode, the system will enter battery meter mode when the slider is pinched once. After entering battery meter mode, the system will remain in this mode for approximately ten seconds. The system may be held in battery meter mode for longer than ten seconds by touching the slider. The system will remain in battery meter mode as long as the slider is touched. Upon exit from battery meter mode, the system goes back into slider demo mode.
PTM Published on: 2012-05-16