Product Training Library

Introducing Latching Lithium Coin Cell Battery Retainers from MPD. These retainers offer a robust, low-cost solution for holding 1225, 2032, and 2450 lithium coin cell batteries in applications such as consumer electronics and handheld devices.

This video discusses the BK-17500-CLIP battery contact clips from Memory Protection Devices (MPD). These clips are designed for use with 18mm 17500 batteries and feature both SMD and THT mounting options.

We take a look at the Raspberry Pi AI Kit. This kit combines the Raspberry Pi M.2 HAT+ with a Hailo AI acceleration module for integrating cost-effective, power efficient, and high performance AI in the Raspberry Pi 5.

We take a look at the MEP Series Open Frame Power Supplies from Delta, offering reliable power for type BF medical equipment with 2 x MOPP electric shock protection compliance, UL certification, and EMC approvals.

We take a look at the 3D35XK-101D LCD Display Eval Board from Grayhill. This 3.5 inch bright CAN Bus display with TouchGFX simplifies application creation and integration for off highway vehicles.

We take a look at the NRF9161 Development Kit from Nordic Semiconductor. This development kit is an affordable, pre-certified board for evaluation and development on the nRF9161 System-in-Package for LTE-M, NB-IoT, GNSS and DECT NR+.

We take a look at the Plug and Make Kit from Arduino. This starter kit introduces a fun, quick, and easy introduction into exploring the world of Arduino with user friendly hardware and software

This video discusses the Flecto Floating Connectors from Harwin Inc., a series of fine pitch board-to-board connectors designed for high pin count applications with movement in the X, Y, and Z axes of the maile connector.

This video discusses the LYTE II DIN-Rail Power Supplies from Delta Electronics, a series of space-saving and cost-effective power supplies designed for industrial and automation applications.

This video discusses the AUAV Dual Air Speed and Altitude Pressure Sensor from Amphenol All Sensors, a high-accuracy differential pressure sensor combined with a barometric pressure sensor in a single package.

This video discusses the Coolant/Fluid Leak Detection Sensor from Amphenol, a moisture leakage sensor designed to detect fluid leaks in critical systems.

We take a look at the XR3160E Serial Bridge Featherwing from Würth Elektronik, an RS232 and RS485 to UART bridge ideal for linking D-SUB9 interfaced devices to the feather ecosystem.

We take a look at the PSoC™ 4000T CAPSENSE™ prototyping kit from Infineon. This prototyping kit demonstrates the low power and high performance operation of fifth-gen CAPSENSE technology.

This video discusses the Transparent Conductor Film from 3M, a thin, flexible film with a proprietary copper grid conductive layer.

We take a look at the nPM1300 EK from Nordic Semiconductor. This is a battery charger evaluation kit for configuring and evaluating the nPM1300 PMIC through an intuitive desktop GUI.

We take a look at the RP20 Pro 5G Fixed Wireless Access MIMO High-Gain Directional Antennas from TE Connectivity with 2 by 2 MIMO technology for fixed wireless access applications.

We take a look at the STM32MP257F-EV1 Evaluation board from STMicroelectronics. This evaluation board delivers a complete demonstration and development platform for user developed AI projects in Linux Yocto Project, Buildroot, and STM32CubeIDE.

This video discusses the EcoGaN™ Power Stage ICs from ROHM Semiconductor. These devices offer high efficiency and miniaturization for primary power supplies in industrial and consumer applications, such as data servers and AC adapters.

This video discusses the GNSS LC29H Series, a high-precision, dual-band GNSS module from Quectel. This module supports concurrent reception of GPS, GLONASS, BDS, and Galileo signals, offering improved positioning accuracy and reliability.

We take a look at the VK-RA8M1 Voice Kit from Renesas Electronics. This reference kit uses the RA8M1 microcontroller to evaluate the functionality of projects designed for edge voice user interface solutions.

We take a look at the Beagle Y AI development board from BeagleBoard.org, an easy to use open source development platform for AI applications.

This video discusses the TTape™ Temperature Monitoring Tape, an extremely thin device for conformal installation from Littelfuse.

We take a look at the TMC5272 EVAL KIT from Analog Devices, an evaluation kit for the miniaturized smart high performance TMC5272 dual-axis stepper motor controller and driver IC.

This video discusses the DI and DU Series Monitoring Relays from Carlo Gavazzi. These relays are designed to monitor current and voltage in both AC and DC systems, providing protection against power anomalies to prevent damage to machinery.

We take a look at the Type2EG EVK from Murata. This kit simplifies the evaluation, testing, and development of applications for software, hardware, and system engineers using the Type2EG BLE module.

This video discusses the Amplon RT Series UPS from Delta Electronics. These online double-conversion uninterruptible power supplies ensure consistent, high-quality sine-wave power, offering reliable backup for systems.

This video discusses the External RF Antennas from Amphenol RF Division.

We take a look at the QUINT 4 SIL 3 Rated Power Supply from Phoenix Contact. This primary switched power supply incorporates preventive function monitoring and selective fuse breaking technology for superior system availability in DIN rail mounting a

This video discusses the TPA191A2-SC6R Bidirectional Current Sense Amplifier with Zero Drift from 3PEAK.

We take a look at the AIROC™ CYW20829 Bluetooth® Low Energy MCU Evaluation Kit from Infineon Technologies for evaluating, prototyping, and developing Bluetooth® Low Energy applications.

This video discusses the WE-STAR-TEC Cable Ferrites from Würth Elektronik. These EMC ferrites are ideal for the additional EMI suppression in the range from 1MHz to 1GHz.

This video discusses the InstaBend™ 086 Flexible RF Cable Assemblies from Amphenol. These cable assemblies are designed to fit and connect where others can't, helping solve challenges for interconnects between RF circuit boards, modules, backplanes,

This video discusses the AR08 CMOS Image Sensors from onsemi. These 8 MP image sensors are ideal for capturing high-resolution images and videos in various lighting conditions.

We take a look at the SiWx917 Wireless Pro Kit from Silicon Labs. This kit offers an introduction to the Singleband WiFi and BLE Radio Board while providing all the tools to develop Silicon Labs wireless applications.

This video discusses the ADS981x 8-Channel Dual Simultaneous-Sampling ADC family from Texas Instruments. They are 18-bit, 8-channel data acquisition systems based on a dual, simultaneous-sampling successive approximation register ADC.

This video discusses the ADL5308 Logarithmic Transimpedance Amplifier from Analog Devices. The logarithmic transimpedance amplifier is optimized for wide dynamic range signal level monitoring in fiber optic systems.

This video discusses the SBC Coil Ferrite Inductors from KEMET. They are magnetic, non-shielded type inductors ideal for DC/DC converters and noise filters.

Unboxing the SparkFun Digi XBee Kit with DigiKey.

We take a look at the Digi XBee RR development kit, which accelerates time-to-market with step-by-step guidance for integrating wireless connectivity using the Digi XBee modules.

This video discusses the MLPS Series Aluminum Electrolytic Capacitors from Knowles. These low-profile aluminum electrolytic capacitors are designed for robust commercial and military-grade power supplies.

We take a look at the Titanium TI375 C529 Development Kit from Efinix with the Ti375 FPGA, which features a quad-core RISC-V block with a custom instruction interface for FPGA prototyping, embedded system design, and AI applications.

We take a look at the STM32WB5MM-DK Discovery Kit from ST Microelectronics. This is a standalone open hardware platform for simplifying wireless application developments that leverage Bluetooth® Low Energy and IEEE802.15.4 connectivity.

We take a look at the Sinamics V20 Smart Access Module from Siemens. This is a web server module that mounts to Sinamics V20 drives for quick and easy wireless operation.

We take a look at the Arduino PLC Starter Kit. This is a programmable logic controller kit offering educational projects for industrial applications with added support from Arduino’s 20 hour Explore PLC course.

We take a look at the Beagle5-Fire from Seeed Studio. This is a single board computer powered by the RISC-V PolarFire system on chip FPGA with four 64 bit application cores for developers, makers, and the open source community to experiment with RIS

We take a look at the XRP Robotics Platform Kit created by a collaboration of education and technology companies. This kit provides an open robotics platform for a comprehensive introduction into engineering, robotics, and software development.

Unboxing the TDK USSM Start Kit with DigiKey.

We take a look at the MAX22216EVKIT from Analog Devices. This is an evaluation kit for the MAX22216 Quad Smart Serial-Controlled Solenoid and Motor Driver with advanced diagnostics.

Inside the kit you’ll find a multimeter with test leads, a screwdriver set, diagonal cutters, needle nose pliers, wire strippers, and a soldering iron with a spare tip, 50 grams of solder, a desoldering pump, 5 feet of wick, and a stand.

In this demo, we're going to test object recognition using the Pi 5 and a web camera. To get started, you will need a power supply, Micro HDMI cable, mouse, keyboard, and a USB webcam.

We take a look at the EPC-R3720 Windows on Arm Development Kit from Advantech. It’s a development kit designed for Arm native app development for Windows IoT.