AUTOMOTIVE

Key Components for Off-Road Equipment

CAPACITORS

981 HE Throttle Position Sensor

Non-Contacting Technology: Hall Effect

Features

Accurate linearity down to: ± 0.5 %
Designed for applications in harsh environments
Spring-loaded types available

981 HE

RESISTORS, VARIABLE

NTCS0603E3

Glass-Protected SMD 0603 NTC Thermistors

Features

Tolerance on R25 down to 1 %, and on B25/85 down to 1 %
High operating temperature up to 150 °C
AEC-Q200 qualified

NTCS0603E3

RESISTORS

TNPW e3 Series

High Stability Thin Film Chip Resistors

Features

Low temperature coefficient and tight tolerances: ± 0.1 %, ± 10 ppm/K
Excellent overall stability at harsh environmental conditions
AEC-Q200 qualified, automotive grade
Case sizes: 0402 to 1210

TNPW e3

RESISTORS

PAT - Automotive Qualified Tantalum Nitride Chip Resistor

Precision Thin Film Chip Resistor

Features

Moisture-resistant tantalum nitride thin film chip resistor
Wide resistance range: from 10 Ω to 3 MΩ; tolerance down to 0.1 %
0.05 % stability at 2000 h, 70 °C
AEC-Q200 qualified

PAT

OPTOELECTRONICS

TCUT1300

Compact Transmissive Sensor

Features

Single- and dual-channel
Wide gap of 3 mm
High temperature operation: up to 105 °C
Compact surface-mount package

TCUT1300

RESISTORS, VARIABLE

34 THE

Bushing Mount Hall Effect Sensor

Features

Accurate linearity down to ± 0.5 %
Very long life: 50 M cycles for servo, 10 M cycles for bushing
All electrical angles available up to 3600°
Designed for applications requiring long life

34 THE

RESISTORS, NON-LINEAR

NTHS0603

SMD NTC 0603 Chip Thermistor

Features

Tolerance on R25 down to 1 %
High-density monolithic construction with glass overcoat
Wide operating temperature range: - 40 °C to + 125 °C

NTHS0603

RESISTORS

ACAS 0606 AT, ACAS 0612 AT - Precision

Precision Thin Film Chip Resistor Arrays

Features

TCR tracking dow to 10 ppm/K (± 5 ppm/K)
Tolerance matching down to 0.1 % (± 0.05 %)
AEC-Q200 qualified
Resistance ratio up to 1:20

ACAS 0606 AT, ACAS 0612 AT - Precision

DIODES

BZX84Bxxx

Silicon Planar Small-Signal Zener Diode

Features

Zener voltages are graded according to the international E 24 standard
Standard Zener voltage tolerance is ± 5 %; replace "C" with "B" for 2 % tolerance
AEC-Q101 qualified
RoHS-compliant

BZX84-V Series

OPTOELECTRONICS

VEMT3700

High-Speed Phototransisitor in PLCC2 Package

Features

Spectral sensitivity from 450 nm to 1080 nm
Half angle of sensitivity ± 60°
Collector light current, typical, 0.5 mA with Ee = 1 mW/cm2

VEMT3700

RECTIFIERS

S1G

400 V, 1 A Standard Rectifier in SMA

Features

Glass-passivated chip technology
Ideal for automated placement
Meets MSL level 1
RoHS-compliant

S1G

RESISTORS

NOMCA

Molded Precision Resistor Network

Features

Moisture-resistant tantalum nitride film
Tight stability of 0.05 % at 1000 h, 125 °C
Tight TCR tracking of 5 ppm/°C
Ratio tolerance down to 0.05 %

NOMCA

CAPACITORS

VJ...31/VJ...34

AEC-Q200 Qualified Multilayer Ceramic Chip Capacitors

Features

C0G (NP0), X7R, and X8R dielectric
Case sizes: 0402 to 1812 and voltages up to 3000 VDC
Operating temperature up to + 175 °C (above + 125 °C derating)
AgPd termination available for epoxy bonding

VJ...31/VJ...34

RECTIFIERS

US1G

400 V, 1 A Ultrafast Rectifier in SMA

Features

Glass-passivated chip technology
Ideal for automated placement
Meets MSL level 1
RoHS-compliant

US1G

OPTOELECTRONICS

VLMW41R1T1

White LED in PLCC-2 Package Based on InGaN Technology

Features

Typical color temperature: 5500 K
Luminous intensity of 180 mcd to 450 mcd
Viewing angle: ± 60°
Operating temperature from 40 °C to 100 °C

VLMW41R1T1

DIODES

3KASMC24

3000 W Surface-Mount PAR® TVS

Features

Junction passivation optimized design passivated anisotropic rectifier technology
TJ = 185 °C capability; suitable for high-reliability and automotive requirements
Available in unidirectional polarity only
3000 W peak pulse power capability with a 10/1000 µs waveform

3KASMC24

OPTOELECTRONICS

TCUT1300

Compact Transmissive Sensor

Features

Single- and dual-channel
Wide gap of 3 mm
High temperature operation: up to 105 °C
Compact surface-mount package

TCUT1300

INDUCTORS

IHLP-1616AB

Low-Profile, High-Current IHLP® Inductor

Features

AEC-Q200 qualified
Shielded construction
Handles high transient current spikes without saturation
Ultra-low buzz noise due to composite construction

IHLP-1616AB-1A IHLP-1616AB-A1

RESISTORS

MM_/SMM

Precision Thin Film MELF Resistors

Features

AEC-Q200 qualified, automotive grade
Available from 10R to 15M
TC down to 5 ppm/K, tolerance down to ± 0.02 %
Unrivaled pulse load robustness

MMU 0102 HF, MMA 0204 HF, MMB 0207 HF
MMU 0102, MMA 0204, MMB 0207 - Precision
MMU 0102, MMA 0204, MMB 0207 - Professional
MMU 0102 VG03, MMA 0204 VG03, MMB 0207 VG03
SMM0102
SMM0204 .... EN803 E8
SMM0204
SMM0207

Key Components for Off-Road Equipment

CAPACITORS

981 HE Throttle Position Sensor

Features

RESISTORS, VARIABLE

NTCS0603E3

Features

RESISTORS

TNPW e3 Series

Features

RESISTORS

PAT - Automotive Qualified Tantalum Nitride Chip Resistor

Features

OPTOELECTRONICS

TCUT1300

Features

信息

帮助

联系我们

关注我们