Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Slide 31
Slide 32
Slide 33
Slide 34
Slide 35
Slide 36
Slide 37
Slide 38
Slide 39
Product List
There are several pre-compiled firmware options available to carry out different tasks using the VNC1L. VDAP (Vinculum Disk And Peripherals) provides the monitor port on the combined interface. USB Port 1 is configured for Host operation and supports HID, Printer, Hub, CDC, and FTDI peripherals. USB Port 2 supports these same devices and adds support for BOMS. VDIF (Vinculum Disk and FTDI monitor) is similar to VDAP except when an FTDI peripheral device is detected on PORT1, the monitor port is disabled on the combined interface and shifted to USB Port 1. VDIF only supports BOMS, HID, and printer devices on Port2.
PTM Published on: 2011-05-26