Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Slide 31
Slide 32
Slide 33
Slide 34
Slide 35
Slide 36
Slide 37
Slide 38
Slide 39
Product List
The VNC1L has 64k flash, 4K RAM, and 2 USB 2.0 Host/Slave ports that operate at the USB defined Full and Low speeds. To control the USB operation, a monitor port is provided using UART, SPI, or 8-bit wide FIFO interfaces. It has 28 GPIO pins, field upgradeable firmware, and low operation current (25mA). The VNC1L is available in a 48-LQFP package. Development can be accomplished with a broad range of development tools and demo code shown later in this module.
PTM Published on: 2011-05-26