Shown here is an example of a power solution for the Kintex 7 FPGA. An actual board was built and tested to meet the power requirements of the FPGA. This particular design was optimized for high efficiency and small space, and eight power rails were designed with four different DC/DC converters with integrated FETs. The design is supported with a complete Bill of Material, schematics for each rail, a test report showing the performance of each device, and a Gerber file to assist with board layout. To see this particular design, simply search for ‘PMP6776’ on the TI website. Many more reference designs are available in Powerlab, TI’s on line searchable repository of power management reference designs.