设置
快速交货
免运费
国际贸易术语
支付类型
市场产品
Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Product List
TDK recommends the following steps be followed during the component selection process: 1) Material selection – the material is determined by the noise frequency that will be suppressed;
2) DC rating – the DC rating of the component should be higher than the maximum circuit current; 3) Evaluation – evaluate signal integrity with different impedance values using a circuit simulator and/or an oscilloscope; 4) EMI test – make the final decision based on the results of a noise emission test in a chamber.
PTM Published on: 2011-11-03
