Slide 1 Slide 2 Slide 3 Slide 4 Slide 5 Slide 6 Slide 7 Slide 8 Slide 9 Slide 10 Slide 11 Slide 12 Slide 13 Slide 14 Slide 15 Slide 16 Slide 17 Product List
EEPROM-Slide11

This illustration summarizes all previous modifications made to the I²C EEPROM device. The address pins are all connected to either ground or Vcc with the control byte corresponding to the address pin setting while pull-up resistors are placed on the WP pin and the clock and data lines to optimize the design. Finally, a decoupling capacitor was added to filter out power supply noise.

PTM Published on: 2011-11-07