Slide 1 Slide 2 Slide 3 Slide 4 Slide 5 Slide 6 Slide 7 Slide 8 Slide 9 Slide 10 Slide 11 Slide 12 Slide 13 Slide 14 Slide 15 Slide 16 Slide 17 Product List
EEPROM-Slide10

Pull-up resistors can also be added to the clock and data lines to optimize the I²C EEPROM design. Depending on the speed of the bus, a 2 or 10 resistor is used. To further optimize the system with minimized power consumption or maximized speed, Application Note AN1028 goes through the calculations to select the optimal resistor size.

PTM Published on: 2011-11-07