Slide 1 Slide 2 Slide 3 Slide 4 Slide 5 Slide 6 Slide 7 Slide 8 Slide 9 Slide 10 Slide 11 Slide 12 Slide 13 Slide 14 Slide 15 Slide 16 Product List
TEM-Slide14

In the installation section of the datasheet, recommended mounting methods are listed. The mounting of the TEM is recommended based on its size or typical application. There are many ways to mount a TEM into a system. These include but are not limited to: solder mounting, epoxy mounting, or clamping with uniform pressure. Typically when clamping a TEM, a thermal interface is needed.

PTM Published on: 2018-08-27