Connection to MicroModule is accomplished via header J2, where J2 provides the connection to the unit’s USB interface. The integrator will need a cable with one female end to mate to J2 and a second end to mate to the desired interface (a USB port or PCBA). The MicroModule’s PCB J2 header, is a Molex series #53261-0871, with mating connector #51021-0800. The metallic contacts that slip into the #51021 housing can be either 50079-8 or 50058-8. The 50079 contacts accept wires 26-28 awg and the 50058 contacts accept wires 28-32 awg.