Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 2

Filters

Stacked

Scrolling

Showing

of 2

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LT3094EMSE#PBF IC REG LIN NEG ADJ 500MA 12MSOP Analog Devices Inc.	2,792 In Stock	1 : ¥68.86000 Tube	-	Tube	Active	Negative	Adjustable	1	-2.3V	-19.5V	0V	0.41V @ 500mA	500mA	2.35 mA	23 mA	108dB ~ 28dB (120Hz ~ 10MHz)	Enable, Power Good, Soft Start	Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	Surface Mount	12-TSSOP (0.118", 3.00mm Width) Exposed Pad	12-MSOP-EP
LT3061HMS8E#PBF IC REG LIN POS ADJ 100MA 8MSOP Analog Devices Inc.	200 In Stock	1 : ¥56.45000 Tube	-	Tube	Active	Positive	Adjustable	1	45V	0.6V	19V	0.43V @ 100mA	100mA	90 µA	4 mA	85dB (120Hz)	Enable, Soft Start	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 150°C	Surface Mount	8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad	8-MSOP-EP

Showing

of 2

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.