Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LD1117S33TR IC REG LINEAR 3.3V 800MA SOT223 STMicroelectronics	33,888 In Stock	1 : ¥3.74000 Cut Tape (CT) 2,500 : ¥1.32422 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	15V	3.3V	-	1.2V @ 800mA	800mA	10 mA	75dB (120Hz)	-	Over Current, Over Temperature	0°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223
RT9080-33GJ5 IC REG LIN 3.3V 600MA TSOT23-5 Richtek USA Inc.	35,324 In Stock	1 : ¥3.83000 Cut Tape (CT) 3,000 : ¥1.07671 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	0.53V @ 600mA	600mA	4 µA	75dB (1kHz)	Enable	Over Current, Over Temperature	-40°C ~ 85°C (TA)	Surface Mount	SOT-23-5 Thin, TSOT-23-5	TSOT-23-5
MAX8892EXK+T IC REG LIN POS ADJ 150MA SC70-5 Analog Devices Inc./Maxim Integrated	905 In Stock 42,500 Factory	1 : ¥21.51000 Cut Tape (CT) 2,500 : ¥6.14346 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	6V	1.5V	4.5V	-	150mA	40 µA	65dB (10kHz)	Enable	Over Current, Over Temperature	-40°C ~ 85°C (TA)	Surface Mount	5-TSSOP, SC-70-5, SOT-353	SC-70-5

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.