Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

TCR13AGADJ,LF IC REG LINEAR POS ADJ 1.3A 6WCSP Toshiba Semiconductor and Storage	13,424 In Stock	1 : ¥6.72000 Cut Tape (CT) 5,000 : ¥1.34820 Tape & Reel (TR)	TCR13AG	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	6V	0.55V	3.6V	0.163V @ 1A	1.3A	92 µA	-	90dB (1kHz)	Enable	Inrush Current, Over Current, Thermal Shutdown, UVLO	-40°C ~ 85°C (TJ)	Surface Mount	6-XFBGA, WLCSP	6-WCSP (1.2x0.80)
LT3085IMS8E#PBF IC REG LIN POS ADJ 500MA 8MSOP Analog Devices Inc.	1,018 In Stock	1 : ¥55.26000 Tube	-	Tube	Active	Positive	Adjustable	1	36V	0V	36V	0.45V @ 500mA	500mA	10.1 µA	1 mA	90dB ~ 20dB (120Hz ~ 1MHz)	-	Over Current, Over Temperature, Short Circuit	-40°C ~ 125°C	Surface Mount	8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad	8-MSOP-EP
NCP59744FCTCADJT2G IC REG LINEAR POS ADJ 3A 10WLCSP onsemi	0 In Stock	1 : ¥9.11000 Cut Tape (CT)	-	Tape & Reel (TR) Cut Tape (CT)	Obsolete	Positive	Adjustable	1	5.5V	0.8V	3.6V	1.5V @ 3A	3A	2 mA	2 mA	72dB ~ 50dB (1kHz ~ 1MHz)	Enable, Power Good, Soft Start	Over Current, Over Temperature, Under Voltage Lockout (UVLO)	-40°C ~ 125°C (TJ)	Surface Mount	10-XFBGA, WLCSP	10-WLCSP (2.08x1.03)

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.