Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 4

Filters

Stacked

Scrolling

Showing

of 4

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

TLV1117LV33DCYR IC REG LINEAR 3.3V 1A SOT223-4 Texas Instruments	14,664 In Stock	1 : ¥2.87000 Cut Tape (CT) 2,500 : ¥0.82092 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	1.3V @ 800mA	1A	100 µA	-	75dB (120Hz)	-	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223-4
LP38855S-1.2/NOPB IC REG LINEAR 1.2V 1.5A DDPAK Texas Instruments	539 In Stock	1 : ¥34.07000 Tube	-	Tube	Active	Positive	Fixed	1	5.5V	1.2V	-	0.18V @ 1.5A	1.5A	300 µA	15 mA	80dB ~ 65dB (120Hz ~ 1kHz)	Enable	Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	Surface Mount	TO-263-6, D2PAK (5 Leads + Tab), TO-263BA	TO-263 (DDPAK-5)
LT1764AEQ-1.5#TRPBF IC REG LINEAR 1.5V 3A 5DDPAK Analog Devices Inc.	2,205 In Stock	1 : ¥90.28000 Cut Tape (CT) 750 : ¥58.82423 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	20V	1.5V	-	0.66V @ 3A	3A	1.5 mA	200 mA	63dB (120Hz)	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C (TJ)	Surface Mount	TO-263-6, D2PAK (5 Leads + Tab), TO-263BA	DDPAK-5
TLV1117-50IDCY IC REG LINEAR 5V 800MA SOT223-4 Texas Instruments	438 In Stock	1 : ¥7.23000 Tube	-	Tube	Active	Positive	Fixed	1	15V	5V	-	1.3V @ 800mA	800mA	-	-	75dB (120Hz)	-	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223-4

Showing

of 4

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.