250mA, 250mA Voltage Regulators - Linear, Low Drop Out (LDO) Regulators | Power Management (PMIC) | Electronic Components Distributor DigiKey

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

NCV5504DTRKG IC REG LINEAR POS ADJ DPAK-5 onsemi	4,965 In Stock 2,500 Factory	1 : ¥12.84000 Cut Tape (CT) 2,500 : ¥5.64554 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT)	Active	Positive	Adjustable (Fixed)	2	18V	1.25V (3.3V)	5V	0.4V @ 250mA, 0.4V @ 250mA	250mA, 250mA	450 µA	20 mA	75dB ~ 60dB (120Hz ~ 1kHz)	-	Over Current, Over Temperature, Short Circuit	-40°C ~ 150°C	Automotive	AEC-Q100	Surface Mount	TO-252-5, DPAK (4 Leads + Tab), TO-252AD	DPAK-5
PQ2L3182MSPQ IC REG LINEAR 1.8V/3.3V SOT89 Sharp Microelectronics	0 In Stock	Obsolete	-	Tape & Reel (TR)	Obsolete	Positive	Fixed	2	9V	1.8V, 3.3V	-	1V @ 200mA, 1V @ 200mA	250mA, 250mA	400 µA	-	60dB (400kHz)	-	Over Current, Over Temperature	-30°C ~ 80°C	-	-	Surface Mount	TO-243AA	SOT-89
NCP5504DTRKG IC REG LINEAR POS ADJ DPAK-5 onsemi	0 In Stock	Obsolete	-	Tape & Reel (TR)	Obsolete	Positive	Adjustable (Fixed)	2	18V	1.25V (3.3V)	5V	0.4V @ 250mA, 0.4V @ 250mA	250mA, 250mA	450 µA	20 mA	75dB ~ 60dB (120Hz ~ 1kHz)	-	Over Current, Over Temperature, Short Circuit	-25°C ~ 85°C	-	-	Surface Mount	TO-252-5, DPAK (4 Leads + Tab), TO-252AD	DPAK-5

Showing

of 3

250mA, 250mA Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.