Buffers, Drivers, Receivers, Transceivers

Results: 6

Filters

Stacked

Scrolling

Showing

of 6

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Logic Type	Number of Elements	Number of Bits per Element	Input Type	Output Type	Current - Output High, Low	Voltage - Supply	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

SN74LS244DWR IC BUF NON-INVERT 5.25V 20SOIC Texas Instruments	13,820 In Stock	1 : ¥7.65000 Cut Tape (CT) 2,000 : ¥3.24545 Tape & Reel (TR)	74LS	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	2	4	-	3-State	15mA, 24mA	4.75V ~ 5.25V	0°C ~ 70°C (TA)	Surface Mount	20-SOIC (0.295", 7.50mm Width)	20-SOIC
SN74ABT245BDW IC TXRX NON-INVERT 5.5V 20SOIC Texas Instruments	2,122 In Stock	1 : ¥10.71000 Tube	74ABT	Tube	Active	Transceiver, Non-Inverting	1	8	-	3-State	32mA, 64mA	4.5V ~ 5.5V	-40°C ~ 85°C (TA)	Surface Mount	20-SOIC (0.295", 7.50mm Width)	20-SOIC
SN74ABT244ADW IC BUFF NON-INVERT 5.5V 20SOIC Texas Instruments	715 In Stock 6,666 Marketplace	1 : ¥12.92000 Tube	74ABT	Bulk Tube	Active	Buffer, Non-Inverting	2	4	-	3-State	32mA, 64mA	4.5V ~ 5.5V	-40°C ~ 85°C (TA)	Surface Mount	20-SOIC (0.295", 7.50mm Width)	20-SOIC
SN74LVTH245ADW IC TXRX NON-INVERT 3.6V 20SOIC Texas Instruments	702 In Stock	1 : ¥9.44000 Tube	74LVTH	Tube	Active	Transceiver, Non-Inverting	1	8	-	3-State	32mA, 64mA	2.7V ~ 3.6V	-40°C ~ 85°C (TA)	Surface Mount	20-SOIC (0.295", 7.50mm Width)	20-SOIC
SN74ABT16244ADL IC BUFF NON-INVERT 5.5V 48SSOP Texas Instruments	250 In Stock 56,414 Marketplace	1 : ¥16.49000 Tube	74ABT	Bulk Tube	Active	Buffer, Non-Inverting	4	4	-	3-State	32mA, 64mA	4.5V ~ 5.5V	-40°C ~ 85°C (TA)	Surface Mount	48-BSSOP (0.295", 7.50mm Width)	48-SSOP
SN74LVTH16244ADL IC BUF NON-INVERT 3.6V 48SSOP Texas Instruments	554 In Stock 1,554 Marketplace	1 : ¥16.58000 Tube	74LVTH	Bulk Tube	Active	Buffer, Non-Inverting	4	4	-	3-State	32mA, 64mA	2.7V ~ 3.6V	-40°C ~ 125°C (TA)	Surface Mount	48-BSSOP (0.295", 7.50mm Width)	48-SSOP

Showing

of 6

Buffers, Drivers, Receivers, Transceivers

Logic buffers, drivers, receivers and transceivers allow isolated access to logic signals from one circuit for use in another circuit. Buffers pass their input signal, either unchanged or inverted, to their output and may be used to clean up a weak signal or drive a load. In a boolean logic simulator, a buffer is mainly used to increase propagation delay. Logic receivers and transceivers allow isolated communication between data buses.