Common Mode Chokes

Results: 5
Manufacturer
Murata ElectronicsonsemiSTMicroelectronics
Series
DLW21ECMFEMI80
Packaging
Cut Tape (CT)Digi-Reel®Tape & Reel (TR)
Number of Lines
24
Current Rating (Max)
100mA200mA330mA
DC Resistance (DCR) (Max)
350mOhm2.5Ohm5Ohm (Typ)5.5Ohm (Typ)6Ohm (Typ)
Voltage Rating - DC
50V-
Operating Temperature
-55°C ~ 125°C-40°C ~ 85°C
Ratings
-AEC-Q200
Features
-TVS Diode ESD Protection
Mounting Type
Surface MountSurface Mount, Wettable Flank
Size / Dimension
0.067" L x 0.059" W (1.70mm x 1.50mm)0.079" L x 0.047" W (2.00mm x 1.20mm)0.098" L x 0.053" W (2.50mm x 1.35mm)0.102" L x 0.053" W (2.60mm x 1.35mm)
Height (Max)
0.020" (0.50mm)0.022" (0.55mm)0.031" (0.80mm)0.055" (1.40mm)
Package / Case
6-UFQFN10-UFDFN10-WFDFN10-XFDFNHorizontal, 4 PC Pad
Stocking Options
Environmental Options
Media
Marketplace Product
5Results
Showing
of 5
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Filter Type
Number of Lines
Impedance @ Frequency
Current Rating (Max)
DC Resistance (DCR) (Max)
Voltage Rating - DC
Voltage Rating - AC
Operating Temperature
Ratings
Approval Agency
Features
Mounting Type
Size / Dimension
Height (Max)
Package / Case
6-UFQFN
ECMF02-2AMX6
CMC 200MA 2LN SMD ESD
STMicroelectronics
164,770
In Stock
1 : ¥4.42000
Cut Tape (CT)
3,000 : ¥1.96701
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Signal Line
2
-
200mA
2.5Ohm
-
-
-40°C ~ 85°C
-
-
TVS Diode ESD Protection
Surface Mount
0.067" L x 0.059" W (1.70mm x 1.50mm)
0.022" (0.55mm)
6-UFQFN
10-QFN
ECMF04-4HSWM10Y
CMC 100MA 4LN SMD ESD AEC-Q200
STMicroelectronics
7,373
In Stock
1 : ¥6.80000
Cut Tape (CT)
3,000 : ¥2.57556
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Signal Line
4
-
100mA
5.5Ohm (Typ)
-
-
-55°C ~ 125°C
AEC-Q200
-
TVS Diode ESD Protection
Surface Mount, Wettable Flank
0.102" L x 0.053" W (2.60mm x 1.35mm)
0.031" (0.80mm)
10-WFDFN
10-XFDFN
EMI8042MUTAG
CMC 100MA 4LN SMD ESD
onsemi
8,266
In Stock
1 : ¥7.23000
Cut Tape (CT)
3,000 : ¥2.91660
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Signal Line
4
-
100mA
6Ohm (Typ)
-
-
-40°C ~ 85°C
-
-
TVS Diode ESD Protection
Surface Mount
0.098" L x 0.053" W (2.50mm x 1.35mm)
0.020" (0.50mm)
10-XFDFN
2,960
In Stock
1 : ¥7.48000
Cut Tape (CT)
3,000 : ¥2.88220
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Signal Line
4
-
100mA
5Ohm (Typ)
-
-
-55°C ~ 125°C
-
-
TVS Diode ESD Protection
Surface Mount
0.102" L x 0.053" W (2.60mm x 1.35mm)
0.022" (0.55mm)
10-UFDFN
Horizontal, 4 PC Pad
DLW21SN900SQ2L
CMC 330MA 2LN 90 OHM SMD
Murata Electronics
0
In Stock
Check Lead Time
1 : ¥4.34000
Cut Tape (CT)
2,000 : ¥1.98941
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Signal Line
2
90 Ohms @ 100 MHz
330mA
350mOhm
50V
-
-40°C ~ 85°C
-
-
-
Surface Mount
0.079" L x 0.047" W (2.00mm x 1.20mm)
0.055" (1.40mm)
Horizontal, 4 PC Pad
Showing
of 5

Common Mode Chokes

A common mode choke is an electrical filter that blocks high frequency noise common to two or more data or power lines while allowing the desired DC or low-frequency signal to pass. Common mode (CM) noise current is typically radiated from sources such as unwanted radio signals, unshielded electronics, inverters and motors. Left unfiltered, this noise presents interference problems in electronics and electrical circuits.