Ashley Awalt, Technical Content Developer at DigiKey, presents New Product Discoveries.

Intro to barcode scanning with Barcode click - a very fast and agile barcode scanner on a click board™, which is compliant with a wide range of different 1D and 2D barcode protocols.

Shuttle click is a mikroBUS™ adapter board. It is used to extend mikroBUS™ socket with four additional sockets, in a form of a mikroBUS™ Shuttle.

Air quality 4 click is an advanced air quality sensing device that combines multiple metal-oxide sensing elements on a chip to provide detailed information of the air quality parameters.

The MIKROE-2756 Pi 3 Click Shield from MikroElektronika is an extension board for the Raspberry Pi 3 model B. This shield has two Click Board™ sockets that give users access to over 300 Click Boards.

IrThermo Click™ features MLX90614ESF single zone Infrared Thermometer module capable of non-contact temperature measurements. It is configured to measure temperature in range of -40 to 85 °C with an output resolution of 0.14 °C.

Boost click carries Microchip’s MIC2606, a 2MHz, PWM DC/DC boost switching regulator available in a 2mm x 2mm MLF® package.

2x20W Amp click carries the MAX9744 stereo class D audio power amplifier from Maxim Integrated. This click brings the Class AB sound performance with Class D efficiency.

On episode nine of New Product Discoveries, Randall features the AS3935 Franklin Lightning Sensor IC from ams. Due to the small size, MikroElektronika has designed a Click Board to assist customers.

Joey, from DigiKey, explains the benefits of developing with the Click Boards from MikroElektronika. The click boards come pre-assembled with all passive components so you can focus less on the board and more on your application.

3D Hall click carries the MLX90333 Triaxis™ Hall sensor, capable of detecting the position of any magnet in nearby space. It does so by being sensitive to three components of flux density (BX, BY, BZ).

Magneto click carries an AS5048A contactless magnetic angle position sensor. The sensing circuitry relies on the Hall Effect to detect the vector of a nearby magnetic field in a 360º two-dimensional plane parallel to the surface of the chip.

Randall introduces the imp005 from Murata Electronics and Electric Imp. This highly integrated IoT node with dual band WiFi and Ethernet capabilities decreases time to market and development cost.

MikroElektronika’s MIKROE-1444 Thunder click features the ams AS3935 lightning sensor as well as the MA5532 coil antenna. It detects the presence and proximity of potentially hazardous lightning activity in the vicinity.

3D Motion click carries Microchip’s MM7150 9-axis sensor fusion motion module. It’s a complete self contained solution comprising a 3-axis accelerometer, a gyroscope, a magnetometer, and a SSC7150 motion coprocessor.

DAC2 click carries LTC2601CDD, a 16-bit digital-to-analog converter, along with voltage output screw terminals. The chip has high rail-to-rail output drives (±15mA, Min) and double-buffered data latches.

MikroElektronika's Hexiwear is a wearable development kit capable of wirelessly connecting to nearby devices or the cloud.

8x8 R click is a serial 8x8 LED Matrix display, carrying MAX7219 8-digit LED display driver module, as well as 64 RED LEDs. 8x8 R Click™ communicates with target board microcontroller via four mikroBUS™ SPI lines (DIN, DOUT, CLK and CS).

EEPROM3 click carries Atmel’s AT24CM02 DIP-8 socket EEPROM chip with 256 KB of memory. The chip has byte and page write speeds equal or less than 10 ms. It’s specified for a million write cycles, with 100 years of data retention.

Shake2Wake click carries an ADXL362 ultralow power, 3-axis MEMS accelerometer from Analog Devices. The distinguishing feature of this IC is that it incorporates several activity detection modes.