Slide 1 Slide 2 Slide 3 Slide 4 Slide 5 Slide 6 Slide 7 Slide 8 Slide 9 Slide 10 Slide 11 Slide 12 Slide 13 Slide 14 Slide 15 Slide 16 Slide 17 Slide 18 Slide 19 Slide 20 Slide 21 Slide 22 Slide 23 Slide 24 Slide 25 Slide 26 Slide 27 Slide 28 Slide 29 Slide 30 Slide 31 Product List
Gate Drivers Overview Slide 10

Dead time is programmed very easily with an external resistor on the DT pin. Some products have a fixed dead time and others can be programmed. The curve in the table on this slide shows the typical dead time in µS (0.18 µS if the resistance = 0) vs. the resistance in k.

PTM Published on: 2013-04-23