Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

LD1117S33TR IC REG LINEAR 3.3V 800MA SOT223 STMicroelectronics	35,245 In Stock	1 : ¥3.74000 Cut Tape (CT) 2,500 : ¥1.32422 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	15V	3.3V	-	1.2V @ 800mA	800mA	10 mA	-	75dB (120Hz)	-	Over Current, Over Temperature	0°C ~ 125°C	-	-	Surface Mount	TO-261-4, TO-261AA	SOT-223
LT3094IDD#TRPBF IC REG LIN NEG ADJ 500MA 12DFN Analog Devices Inc.	11,534 In Stock	1 : ¥79.49000 Cut Tape (CT) 2,500 : ¥43.42054 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Negative	Adjustable	1	-2.3V	-19.5V	0V	0.41V @ 500mA	500mA	2.35 mA	23 mA	108dB ~ 28dB (120Hz ~ 10MHz)	Enable, Power Good, Soft Start	Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	-	-	Surface Mount	12-WFDFN Exposed Pad	12-DFN (3x3)
MCP1792T-3302H/DBVAO IC REG LIN 3.3V 100MA SOT223-3 Microchip Technology	0 In Stock	Active	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	55V	3.3V	-	1.2V @ 100mA	100mA	45 µA	150 µA	80dB ~ 55dB (100Hz ~ 100kHz)	-	Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)	-40°C ~ 150°C (TA)	Automotive	AEC-Q100	Surface Mount	TO-261-4, TO-261AA	SOT-223-3

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.