Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

NCP133AMXADJTCG IC REG LIN POS ADJ 500MA 6XDFN onsemi	28,204 In Stock	1 : ¥9.18000 Cut Tape (CT) 5,000 : ¥2.08349 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	5.5V	0.8V	3.6V	0.25V @ 500mA	500mA	-	-	80dB ~ 70dB (1kHz)	Enable	Over Current, Over Temperature, Under Voltage Lockout (UVLO)	-40°C ~ 85°C	Surface Mount	6-XFDFN Exposed Pad	6-XDFN (1.2x1.2)
LT3081IFE#PBF IC REG LIN POS ADJ 1.5A 16TSSOP Analog Devices Inc.	70 In Stock	1 : ¥75.23000 Tube	-	Tube	Active	Positive	Adjustable	1	36V	0V	34.5V	1.5V @ 1.5A	1.5A	50 µA	5 mA	90dB ~ 20dB (120Hz ~ 1MHz)	Current Limit	Over Current, Over Temperature, Reverse Polarity, Short Circuit	-40°C ~ 125°C	Surface Mount	16-TSSOP (0.173", 4.40mm Width) Exposed Pad	16-TSSOP-EP
REG104GA-3.3/2K5 IC REG LINEAR 3.3V 1A SOT223-6 Texas Instruments	1,373 In Stock	1 : ¥55.68000 Cut Tape (CT) 2,500 : ¥30.39303 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	15V	3.3V	-	0.48V @ 1A	1A	0.7 mA	1.8 mA	65dB (120Hz)	Enable	Over Current, Over Temperature	-40°C ~ 85°C	Surface Mount	SOT-223-6	SOT-223-6

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.