Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LT1964EDD#PBF IC REG LIN NEG ADJ 200MA 8DFN Analog Devices Inc.	2,148 In Stock	1 : ¥42.08000 Tube	-	Tube	Active	Negative	Adjustable	1	-20V	-1.22V	-20V	0.49V @ 200mA	200mA	-	-	54dB (120Hz)	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	Surface Mount	8-WFDFN Exposed Pad	8-DFN (3x3)
LT1963AES8#TRPBF IC REG LINEAR POS ADJ 1.5A 8SO Analog Devices Inc.	10,485 In Stock	1 : ¥52.96000 Cut Tape (CT) 2,500 : ¥28.90985 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	20V	1.21V	20V	0.55V @ 1.5A	1.5A	1.5 mA	120 mA	63dB (120Hz)	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	Surface Mount	8-SOIC (0.154", 3.90mm Width)	8-SO
TPS74401RGRR IC REG LINEAR POS ADJ 3A 20VQFN Texas Instruments	2,199 In Stock	1 : ¥78.57000 Cut Tape (CT) 3,000 : ¥42.90230 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	5.5V	0.8V	3.6V	0.24V @ 3A	3A	-	100 µA	73dB ~ 50dB (1kHz ~ 800kHz)	Enable	Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)	-40°C ~ 125°C (TJ)	Surface Mount	20-VFQFN Exposed Pad	20-VQFN (3.5x3.5)

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.