Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LD1117AS33TR IC REG LINEAR 3.3V 1A SOT223 STMicroelectronics	17,188 In Stock	1 : ¥7.31000 Cut Tape (CT) 2,500 : ¥3.10254 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	15V	3.3V	-	1.3V @ 1A	1A	10 mA	-	75dB (120Hz)	-	Over Current, Over Temperature	0°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223
TLV75733PDBVR IC REG LINEAR 3.3V 1A SOT23-5 Texas Instruments	4,193 In Stock	1 : ¥4.00000 Cut Tape (CT) 3,000 : ¥1.13338 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	0.475V @ 1A	1A	-	40 µA	52dB (1kHz ~ 1MHz)	Enable	Current Limit, Thermal Shutdown, UVLO	-40°C ~ 125°C (TJ)	Surface Mount	SC-74A, SOT-753	SOT-23-5
MIC29302AWD-TR IC REG LINEAR POS ADJ 3A TO252-5 Microchip Technology	3,975 In Stock	1 : ¥21.34000 Cut Tape (CT) 2,500 : ¥16.23739 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	16V	1.24V	15V	0.8V @ 3A	3A	20 mA	150 mA	-	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	Surface Mount	TO-252-6, DPAK (5 Leads + Tab)	TO-252-5

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.