Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LT1963AEQ#PBF IC REG LIN POS ADJ 1.5A 5DDPAK Analog Devices Inc.	1,087 In Stock	1 : ¥62.91000 Tube	-	Tube	Active	Positive	Adjustable	1	20V	1.21V	20V	0.55V @ 1.5A	1.5A	1.5 mA	120 mA	63dB (120Hz)	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	Surface Mount	TO-263-6, D2PAK (5 Leads + Tab), TO-263BA	DDPAK-5
AP2127K-1.8TRG1 IC REG LINEAR 1.8V 300MA SOT23-5 Diodes Incorporated	257,438 In Stock	1 : ¥2.21000 Cut Tape (CT) 3,000 : ¥0.49324 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6V	1.8V	-	0.7V @ 300mA	300mA	90 µA	-	68dB ~ 54dB (100Hz ~ 10kHz)	-	Over Current, Over Temperature	-40°C ~ 85°C	Surface Mount	SC-74A, SOT-753	SOT-23-5
BU18JA3DG-CTR 300MA 1.8V, CMOS LDO REGULATORSF Rohm Semiconductor	3,105 In Stock	1 : ¥7.31000 Cut Tape (CT) 3,000 : ¥1.37836 Tape & Reel (TR)	BUxxJA3DG-C	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6V	1.8V	-	0.33V @ 300mA	300mA	80 µA	-	60dB (1kHz)	Enable	Over Current, Over Temperature, Short Circuit	-40°C ~ 125°C (TA)	Surface Mount	SC-74A, SOT-753	5-SSOP

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.