Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

AP2112K-3.3TRG1 IC REG LINEAR 3.3V 600MA SOT25 Diodes Incorporated	166,589 In Stock 2,268,000 Factory	1 : ¥2.98000 Cut Tape (CT) 3,000 : ¥0.85712 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6V	3.3V	-	0.4V @ 600mA	600mA	80 µA	-	65sB (100Hz ~ 1KHz)	Enable	Over Current, Over Temperature	-40°C ~ 85°C	Surface Mount	SC-74A, SOT-753	SOT-25
TPS7A4700RGWR IC REG LINEAR POS ADJ 1A 20VQFN Texas Instruments	8,348 In Stock	1 : ¥44.66000 Cut Tape (CT) 3,000 : ¥23.21623 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	35V	1.4V	20.5V	0.45V @ 1A	1A	1 mA	6.1 mA	78dB (1kHz)	Enable	Over Current, Over Temperature, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	Surface Mount	20-VQFN Exposed Pad	20-VQFN (5x5)
MAX8892EXK+T IC REG LIN POS ADJ 150MA SC70-5 Analog Devices Inc./Maxim Integrated	905 In Stock 42,500 Factory	1 : ¥13.94000 Cut Tape (CT) 2,500 : ¥6.14346 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	6V	1.5V	4.5V	-	150mA	40 µA	-	65dB (10kHz)	Enable	Over Current, Over Temperature	-40°C ~ 85°C (TA)	Surface Mount	5-TSSOP, SC-70-5, SOT-353	SC-70-5

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.