Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

NCP718BSN330T1G IC REG LIN 3.3V 300MA TSOT23-5 onsemi	36,578 In Stock	1 : ¥4.68000 Cut Tape (CT) 3,000 : ¥1.67912 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	24V	3.3V	-	0.44V @ 300mA	300mA	8 µA	300 µA	60dB (1kHz)	Soft Start	Over Current, Over Temperature	-40°C ~ 125°C (TJ)	Surface Mount	SOT-23-5 Thin, TSOT-23-5	TSOT-23-5
LT1762EMS8-3.3#PBF IC REG LINEAR 3.3V 150MA 8MSOP Analog Devices Inc.	1,222 In Stock	1 : ¥37.07000 Tube	-	Tube	Active	Positive	Fixed	1	20V	3.3V	-	0.4V @ 150mA	150mA	-	-	65dB (120Hz)	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	Surface Mount	8-TSSOP, 8-MSOP (0.118", 3.00mm Width)	8-MSOP
TLV75901PDRVT IC REG LINEAR POS ADJ 1A 6WSON Texas Instruments	9,657 In Stock	1 : ¥10.29000 Cut Tape (CT) 250 : ¥6.71972 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	6V	0.55V	5.5V	0.225V @ 1A	1A	35 µA	-	50dB ~ 30dB (1kHz ~ 1MHz)	Enable	Over Temperature, Short Circuit, Soft Start	-40°C ~ 125°C (TJ)	Surface Mount	6-WDFN Exposed Pad	6-WSON (2x2)

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.