Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 4

Filters

Stacked

Scrolling

Showing

of 4

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

XC6227C331PR-G IC REG LINEAR 3.3V 700MA SOT89-5 Torex Semiconductor Ltd	49,862 In Stock	1 : ¥7.65000 Cut Tape (CT) 1,000 : ¥3.26965 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6V	3.3V	-	0.2V @ 300mA	700mA	220 µA	-	65dB (1kHz)	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 85°C	Surface Mount	SOT-89-5/6	SOT-89-5
LT1764AEFE#PBF IC REG LINEAR POS ADJ 3A 16TSSOP Analog Devices Inc.	943 In Stock	1 : ¥89.09000 Tube	-	Tube	Active	Positive	Adjustable	1	20V	1.21V	20V	0.66V @ 3A	3A	1.5 mA	200 mA	63dB (120Hz)	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	Surface Mount	16-TSSOP (0.173", 4.40mm Width) Exposed Pad	16-TSSOP-EP
L78L10ACUTR IC REG LINEAR 10V 100MA SOT89-3 STMicroelectronics	22,139 In Stock	1 : ¥5.42000 Cut Tape (CT) 2,500 : ¥1.90382 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	30V	10V	-	-	100mA	5.5 mA	6 mA	45dB (120Hz)	-	Over Current, Over Temperature, Short Circuit	0°C ~ 125°C	Surface Mount	TO-243AA	SOT-89-3
LT1963EST-2.5#PBF IC REG LINEAR 2.5V 1.5A SOT223-3 Analog Devices Inc.	1,359 In Stock	1 : ¥55.34000 Tube	-	Tube	Active	Positive	Fixed	1	20V	2.5V	-	0.55V @ 1.5A	1.5A	1.5 mA	120 mA	63dB (120Hz)	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223-3

Showing

of 4

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.