Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 4

Filters

Stacked

Scrolling

Showing

of 4

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

AP2112K-3.3TRG1 IC REG LINEAR 3.3V 600MA SOT25 Diodes Incorporated	179,385 In Stock 2,415,000 Factory	1 : ¥2.87000 Cut Tape (CT) 3,000 : ¥0.82774 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6V	3.3V	-	0.4V @ 600mA	600mA	80 µA	-	65sB (100Hz ~ 1KHz)	Enable	Over Current, Over Temperature	-40°C ~ 85°C	Surface Mount	SC-74A, SOT-753	SOT-25
LM1117MP-5.0/NOPB IC REG LINEAR 5V 800MA SOT223 Texas Instruments	10,091 In Stock	1 : ¥13.30000 Cut Tape (CT) 1,000 : ¥6.03240 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	15V	5V	-	1.2V @ 800mA	800mA	5 mA	10 mA	75dB (120Hz)	-	Over Current, Over Temperature	0°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223
NCP1117LPST33T3G IC REG LINEAR 3.3V 1A SOT223 onsemi	8,217 In Stock	1 : ¥3.86000 Cut Tape (CT) 4,000 : ¥1.28529 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	18V	3.3V	-	1.4V @ 1A	1A	700 µA	-	60dB (120Hz)	-	Over Current, Over Temperature	0°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223
MC78M05CDTG IC REG LINEAR 5V 500MA DPAK onsemi	0 In Stock Check Lead Time	1 : ¥4.35000 Tube	-	Tube	Active	Positive	Fixed	1	35V	5V	-	-	500mA	-	-	80dB (120Hz)	-	Over Temperature, Short Circuit	0°C ~ 125°C	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	DPAK

Showing

of 4

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.