Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

TLV76033DBZR IC REG LINEAR 3.3V 100MA SOT23-3 Texas Instruments	3,028 In Stock	1 : ¥3.49000 Cut Tape (CT) 3,000 : ¥0.74627 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	30V	3.3V	-	1.1V @ 100mA	100mA	5 mA	-	-	-	Over Temperature	-40°C ~ 125°C (TJ)	-	-	Surface Mount	TO-236-3, SC-59, SOT-23-3	SOT-23-3
NCV8161ASN180T1G IC REG LINEAR 1.8V 450MA 5TSOP onsemi	13,410 In Stock 12,000 Factory	1 : ¥5.53000 Cut Tape (CT) 3,000 : ¥2.51937 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	1.8V	-	0.48V @ 450mA	450mA	23 µA	-	91dB ~ 48dB (100Hz ~ 100kHz)	Enable	Over Current, Over Temperature	-40°C ~ 125°C (TA)	Automotive	AEC-Q100	Surface Mount	SOT-23-5 Thin, TSOT-23-5	5-TSOP
MAX15027ATB+T IC REG LINEAR POS ADJ 1A 10TDFN Analog Devices Inc./Maxim Integrated	2,684 In Stock	1 : ¥31.62000 Cut Tape (CT) 2,500 : ¥14.95980 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	3.6V	0.5V	3.3V	0.225V @ 1A	1A	410 µA	560 µA	-	Enable, Soft Start	Over Temperature, Short Circuit	-40°C ~ 125°C (TA)	-	-	Surface Mount	10-WFDFN Exposed Pad	10-TDFN (3x3)

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.