13.3V Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 4

Filters

Stacked

Scrolling

Applied FiltersRemove All

Showing

of 4

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LD29300P2MTR IC REG LINEAR POS ADJ 3A P2PAK-4 STMicroelectronics	2,139 In Stock	1 : ¥12.73000 Cut Tape (CT) 1,000 : ¥6.26170 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	14V	1.23V	13.3V	0.7V @ 3A	3A	50 mA	100 mA	75dB (120Hz)	-	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	TO-263-6, D2PAK (5 Leads + Tab), TO-263BA	P2PAK-4
LD29150PTR IC REG LINEAR POS ADJ 1.5A PPAK STMicroelectronics	69,885 In Stock	1 : ¥14.03000 Cut Tape (CT) 2,500 : ¥6.41029 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	14V	1.23V	13.3V	0.7V @ 1.5A	1.5A	180 µA	80 mA	75dB (120Hz)	Enable	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	TO-252-5, DPAK (4 Leads + Tab), TO-252AD	PPAK
LD29150PT IC REG LINEAR POS ADJ 1.5A PPAK STMicroelectronics	0 In Stock	Obsolete	-	Tube	Obsolete	Positive	Adjustable	1	14V	1.23V	13.3V	0.7V @ 1.5A	1.5A	180 µA	80 mA	75dB (120Hz)	Enable	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	TO-252-5, DPAK (4 Leads + Tab), TO-252AD	PPAK
LD29300P2M IC REG LINEAR POS ADJ 3A P2PAK-4 STMicroelectronics	0 In Stock	Obsolete	-	Tube	Obsolete	Positive	Adjustable	1	14V	1.23V	13.3V	0.7V @ 3A	3A	50 mA	100 mA	75dB (120Hz)	-	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	TO-263-6, D2PAK (5 Leads + Tab), TO-263BA	P2PAK-4

Showing

of 4

13.3V Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.