Power Distribution Switches, Load Drivers

Results: 2
Packaging
BulkCut Tape (CT)Digi-Reel®Tape & Reel (TR)
Product Status
ActiveNot For New Designs
Output Type
N-ChannelP-Channel
Voltage - Load
0.75V ~ 3.6V1.1V ~ 3.6V
Current - Output (Max)
1A4A
Rds On (Typ)
5.3mOhm44mOhm
Features
Load Discharge, Slew Rate ControlledSlew Rate Controlled
Supplier Device Package
4-DSBGA (0.9x0.9)8-DSBGA
Package / Case
4-UFBGA, DSBGA8-XFBGA, DSBGA
Stocking Options
Environmental Options
Media
Marketplace Product
2Results
Showing
of 2
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Switch Type
Number of Outputs
Ratio - Input:Output
Output Configuration
Output Type
Interface
Voltage - Load
Voltage - Supply (Vcc/Vdd)
Current - Output (Max)
Rds On (Typ)
Input Type
Features
Fault Protection
Operating Temperature
Mounting Type
Supplier Device Package
Package / Case
4-DSBGA-YZT
TPS22907YZTR
IC PWR SWITCH P-CHAN 1:1 4DSBGA
Texas Instruments
15,688
In Stock
3,394,700
Marketplace
1 : ¥7.48000
Cut Tape (CT)
3,000 : ¥2.88840
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Bulk
Not For New Designs
General Purpose
1
1:1
High Side
P-Channel
On/Off
1.1V ~ 3.6V
Not Required
1A
44mOhm
Non-Inverting
Slew Rate Controlled
-
-40°C ~ 85°C (TA)
Surface Mount
4-DSBGA (0.9x0.9)
4-UFBGA, DSBGA
8-BGA Pkg
TPS22920YZPRB
IC PWR SWITCH N-CHAN 1:1 8DSBGA
Texas Instruments
15,251
In Stock
1 : ¥9.69000
Cut Tape (CT)
3,000 : ¥3.63284
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
General Purpose
1
1:1
High Side
N-Channel
On/Off
0.75V ~ 3.6V
Not Required
4A
5.3mOhm
Non-Inverting
Load Discharge, Slew Rate Controlled
-
-40°C ~ 85°C (TA)
Surface Mount
8-DSBGA
8-XFBGA, DSBGA
Showing
of 2

Power Distribution Switches, Load Drivers

Products in this family are solid-state devices used to connect or interrupt the flow of current to a supported load, under the direction of a logic-level control signal that is of itself incapable or unsuitable for supplying the load. They integrate the semiconductor switching device used to interrupt current flow and incorporate additional supporting components/functions such as over-voltage clamping, current limiting, and under-voltage lockouts, which differentiate them from similar IC and discrete components.