28-TSSOP (0.173", 4.40mm Width) Exposed Pad Power Distribution Switches, Load Drivers

Results: 2
Packaging
Tape & Reel (TR)Tube
Switch Type
-General Purpose
Number of Outputs
4-
Ratio - Input:Output
1:4-
Output Configuration
-High Side
Output Type
-N-Channel
Interface
-SPI
Current - Output (Max)
3.6A-
Rds On (Typ)
100mOhm-
Input Type
-Non-Inverting
Features
-Load Discharge, Slew Rate Controlled
Fault Protection
-Current Limiting (Fixed), Over Load, Over Temperature, Over Voltage, Short Circuit, UVLO
Operating Temperature
-40°C ~ 150°C (TJ)-
Stocking Options
Environmental Options
Media
Marketplace Product
2Results
Applied FiltersRemove All
Showing
of 2
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Switch Type
Number of Outputs
Ratio - Input:Output
Output Configuration
Output Type
Interface
Voltage - Load
Voltage - Supply (Vcc/Vdd)
Current - Output (Max)
Rds On (Typ)
Input Type
Features
Fault Protection
Operating Temperature
Grade
Qualification
Mounting Type
Supplier Device Package
Package / Case
HIGH-SIDE SWITCH 60V HTSSOP28
MC33XS2410EL
HIGH-SIDE SWITCH 60V HTSSOP28
NXP USA Inc.
0
In Stock
Check Lead Time
1 : ¥74.96000
Tube
-
Tube
Active
General Purpose
4
1:4
High Side
N-Channel
SPI
3V ~ 60V
Not Required
3.6A
100mOhm
Non-Inverting
Load Discharge, Slew Rate Controlled
Current Limiting (Fixed), Over Load, Over Temperature, Over Voltage, Short Circuit, UVLO
-40°C ~ 150°C (TJ)
Automotive
AEC-Q100
Surface Mount
28-HTSSOP
28-TSSOP (0.173", 4.40mm Width) Exposed Pad
HIGH SIDE SWITCH, 24V, 100MOHM,
MC33XS2410ELR2
HIGH SIDE SWITCH, 24V, 100MOHM,
NXP USA Inc.
0
In Stock
Check Lead Time
2,500 : ¥43.42412
Tape & Reel (TR)
-
Tape & Reel (TR)
Active
-
-
-
-
-
-
3V ~ 60V
Not Required
-
-
-
-
-
-
Automotive
AEC-Q100
Surface Mount
28-HTSSOP
28-TSSOP (0.173", 4.40mm Width) Exposed Pad
Showing
of 2

28-TSSOP (0.173", 4.40mm Width) Exposed Pad Power Distribution Switches, Load Drivers

Products in this family are solid-state devices used to connect or interrupt the flow of current to a supported load, under the direction of a logic-level control signal that is of itself incapable or unsuitable for supplying the load. They integrate the semiconductor switching device used to interrupt current flow and incorporate additional supporting components/functions such as over-voltage clamping, current limiting, and under-voltage lockouts, which differentiate them from similar IC and discrete components.