Buffers, Drivers, Receivers, Transceivers

Results: 5

Filters

Stacked

Scrolling

Showing

of 5

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Logic Type	Number of Elements	Number of Bits per Element	Input Type	Output Type	Current - Output High, Low	Voltage - Supply	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

SN74LVC2G07DCKR IC BUF NON-INVERT 5.5V SC70-6 Texas Instruments	34,851 In Stock	1 : ¥3.66000 Cut Tape (CT) 3,000 : ¥0.80382 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	2	1	-	Open Drain	-, 32mA	1.65V ~ 5.5V	-40°C ~ 125°C (TA)	Surface Mount	6-TSSOP, SC-88, SOT-363	SC-70-6
SN74LVC2G17DCKR IC BUF NON-INVERT 5.5V SC70-6 Texas Instruments	95,760 In Stock	1 : ¥3.74000 Cut Tape (CT) 3,000 : ¥0.83459 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	2	1	Schmitt Trigger	Push-Pull	32mA, 32mA	1.65V ~ 5.5V	-40°C ~ 125°C (TA)	Surface Mount	6-TSSOP, SC-88, SOT-363	SC-70-6
SN74AHC1G126DCKR IC BUF NON-INVERT 5.5V SC70-5 Texas Instruments	28,507 In Stock	1 : ¥2.55000 Cut Tape (CT) 3,000 : ¥0.44207 Tape & Reel (TR)	74AHC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	1	1	-	3-State	8mA, 8mA	2V ~ 5.5V	-40°C ~ 125°C (TA)	Surface Mount	5-TSSOP, SC-70-5, SOT-353	SC-70-5
SN74AHCT1G125DCKR IC BUF NON-INVERT 5.5V SC70-5 Texas Instruments	27,660 In Stock	1 : ¥3.23000 Cut Tape (CT) 3,000 : ¥0.57270 Tape & Reel (TR)	74AHCT	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	1	1	-	3-State	8mA, 8mA	4.5V ~ 5.5V	-40°C ~ 125°C (TA)	Surface Mount	5-TSSOP, SC-70-5, SOT-353	SC-70-5
SN74AHCT125PWR IC BUF NON-INVERT 5.5V 14TSSOP Texas Instruments	0 In Stock Check Lead Time	1 : ¥3.45000 Cut Tape (CT) 2,000 : ¥0.98510 Tape & Reel (TR)	74AHCT	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	4	1	-	3-State	8mA, 8mA	4.5V ~ 5.5V	-40°C ~ 85°C (TA)	Surface Mount	14-TSSOP (0.173", 4.40mm Width)	14-TSSOP

Showing

of 5

Buffers, Drivers, Receivers, Transceivers

Logic buffers, drivers, receivers and transceivers allow isolated access to logic signals from one circuit for use in another circuit. Buffers pass their input signal, either unchanged or inverted, to their output and may be used to clean up a weak signal or drive a load. In a boolean logic simulator, a buffer is mainly used to increase propagation delay. Logic receivers and transceivers allow isolated communication between data buses.