Buffers, Drivers, Receivers, Transceivers

Results: 5

Filters

Stacked

Scrolling

Showing

of 5

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Logic Type	Number of Elements	Number of Bits per Element	Input Type	Output Type	Current - Output High, Low	Voltage - Supply	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

SN74LVC1G17DBVR IC BUF NON-INVERT 5.5V SOT23-5 Texas Instruments	90,111 In Stock	1 : ¥3.06000 Cut Tape (CT) 3,000 : ¥0.53317 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	1	1	Schmitt Trigger	Push-Pull	32mA, 32mA	1.65V ~ 5.5V	-40°C ~ 125°C (TA)	-	-	Surface Mount	SC-74A, SOT-753	SOT-23-5
SN74LVC3G07DCUR IC BUFFER NON-INVERT 5.5V 8VSSOP Texas Instruments	9,087 In Stock	1 : ¥4.68000 Cut Tape (CT) 3,000 : ¥1.65021 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	3	1	-	Open Drain	-, 32mA	1.65V ~ 5.5V	-40°C ~ 125°C (TA)	-	-	Surface Mount	8-VFSOP (0.091", 2.30mm Width)	8-VSSOP
74LVC3G07DC,125 IC BUF NON-INVERT 5.5V 8VSSOP Nexperia USA Inc.	12,932 In Stock	1 : ¥5.44000 Cut Tape (CT) 3,000 : ¥1.92595 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	3	1	-	Open Drain	-, 32mA	1.65V ~ 5.5V	-40°C ~ 125°C (TA)	-	-	Surface Mount	8-VFSOP (0.091", 2.30mm Width)	8-VSSOP
SN74LVC3G07DCUT IC BUFFER NON-INVERT 5.5V 8VSSOP Texas Instruments	1,365 In Stock 16,302 Marketplace	1 : ¥10.97000 Cut Tape (CT) 250 : ¥7.12540 Tape & Reel (TR) 539 : ¥4.07853 Bulk	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel® Bulk	Active	Buffer, Non-Inverting	3	1	-	Open Drain	-, 32mA	1.65V ~ 5.5V	-40°C ~ 125°C (TA)	-	-	Surface Mount	8-VFSOP (0.091", 2.30mm Width)	8-VSSOP
NLV37WZ07USG IC BUFFER NON-INVERT 5.5V US8 onsemi	0 In Stock	1 : ¥3.66000 Cut Tape (CT)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Obsolete	Buffer, Non-Inverting	3	1	-	Open Drain	-, 32mA	1.65V ~ 5.5V	-55°C ~ 125°C (TA)	Automotive	AEC-Q100	Surface Mount	8-VFSOP (0.091", 2.30mm Width)	US8

Showing

of 5

Buffers, Drivers, Receivers, Transceivers

Logic buffers, drivers, receivers and transceivers allow isolated access to logic signals from one circuit for use in another circuit. Buffers pass their input signal, either unchanged or inverted, to their output and may be used to clean up a weak signal or drive a load. In a boolean logic simulator, a buffer is mainly used to increase propagation delay. Logic receivers and transceivers allow isolated communication between data buses.