AC DC Converters, Offline Switches

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Isolation	Internal Switch(s)	Voltage - Breakdown	Topology	Voltage - Start Up	Voltage - Supply (Vcc/Vdd)	Duty Cycle	Frequency - Switching	Fault Protection	Control Features	Operating Temperature	Package / Case	Supplier Device Package	Mounting Type

NCP1399APDR2G IC OFFLINE SW HALF-BRDG 16SOIC onsemi	1,993 In Stock	1 : ¥17.00000 Cut Tape (CT) 2,500 : ¥7.14102 Tape & Reel (TR)	NCP1399	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Isolated	No	-	Half-Bridge	15.8 V	9.5V ~ 20V	50%	20kHz ~ 750kHz	Current Limiting, Open Loop, Over Load, Over Temperature, Over Voltage, Short Circuit	-	-55°C ~ 150°C (TJ)	16-SOIC (0.154", 3.90mm Width), 14 Leads	16-SOIC	Surface Mount
NCP13992AFDR2G IC OFFLINE SW HALF-BRDG 16SOIC onsemi	4,461 In Stock	1 : ¥18.79000 Cut Tape (CT) 2,500 : ¥7.88063 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Isolated	No	-	Half-Bridge	9 V	9.5V ~ 20V	50%	20kHz ~ 750kHz	Current Limiting, Open Loop, Over Load, Over Temperature, Over Voltage, Short Circuit	EN, Frequency Control, Soft Start, Sync	-50°C ~ 150°C (TJ)	16-SOIC (0.154", 3.90mm Width), 14 Leads	16-SOIC	Surface Mount
NCP1399ACDR2G IC OFFLINE SW HALF-BRDG 16SOIC onsemi	2,347 In Stock	1 : ¥19.55000 Cut Tape (CT) 2,500 : ¥8.21537 Tape & Reel (TR)	NCP1399	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Isolated	No	-	Half-Bridge	15.8 V	9.5V ~ 20V	50%	20kHz ~ 750kHz	Current Limiting, Open Loop, Over Load, Over Temperature, Over Voltage, Short Circuit	-	-40°C ~ 125°C (TJ)	16-SOIC (0.154", 3.90mm Width), 14 Leads	16-SOIC	Surface Mount

Showing

of 3

AC DC Converters, Offline Switches

Products in this family are component-level control devices used to construct equipment that converts AC utility power to a DC form, typically at a much reduced voltage. Devices which incorporate the primary switching element for the system and those which do not are both included. Due to the high ratio of input to output voltages and need for isolation commonly encountered in such systems, they are often used in conjunction with an external transformer. While use of custom transformers for this purpose is common practice, a variety of stock products intended for such use are available, under the heading of Switching Converter, SMPS Transformers.