Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LT1962EMS8-3.3#PBF IC REG LINEAR 3.3V 300MA 8MSOP Analog Devices Inc.	3,874 In Stock	1 : ¥48.03000 Tube	-	Tube	Active	Positive	Fixed	1	20V	3.3V	-	0.43V @ 300mA	300mA	-	-	65dB (120Hz)	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	Surface Mount	8-TSSOP, 8-MSOP (0.118", 3.00mm Width)	8-MSOP
LT3082MPST#PBF IC REG LIN POS ADJ 200MA SOT223 Analog Devices Inc.	240 In Stock	1 : ¥98.87000 Tube	-	Tube	Active	Positive	Adjustable	1	40V	0V	38.5V	1.65V @ 200mA	200mA	500 µA	-	90dB ~ 20dB (120Hz ~ 1MHz)	-	Over Current, Over Temperature, Reverse Polarity, Short Circuit	-55°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223-3
LT3086MPR#PBF IC REG LIN POS ADJ 2.1A 7DDPAK Analog Devices Inc.	16 In Stock	1 : ¥101.16000 Tube	-	Tube	Active	Positive	Adjustable	1	40V	0.4V	32V	0.54V @ 2.1A	2.1A	2.4 mA	88 mA	80dB (120Hz)	Current Limit, Enable, Power Good, Tracking	Over Current, Over Temperature, Reverse Polarity	-55°C ~ 125°C	Surface Mount	TO-263-8, D2PAK (7 Leads + Tab), TO-263CA	DDPAK-7

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.