Siemens Sinamics V20 Smart Access Module - Unboxing | DigiKey

Inside the box you’ll find the Smart Access Module with a mounting screw and the instruction document. https://www.digikey.com/en/products/detail/siemens/6SL32550VA005AA0/15245187 The Smart Access Module is fast to install with the single mounting screw on the front and a press fit communication interface on the back. The LED indicator is on the front with a power switch on the top right. The module provides a web-based interface for smart phones, tablets, and PCs without any apps or downloads. For this demo we’ll demonstrate how to successfully commission your drive using a mobile device. First install the Smart Access module on your V20 drive and follow the steps for connecting to your device as shown in the instruction document. Then turn on your Access Module. Open the Sinamics V20 web address in your browser. From the home menu select quick commissioning and click each parameter you wish to configure. For this drive, we’ll be using the following settings: Frequency to 60 hertz, motor ratings for 230 volts, 1.5 amps, and 0.25 horsepower-- and motor speed for 1200 rpm. When you've completed setting parameters click next. Select your connection for controlling your drive then click next. Now select your application. Lastly, make adjustments needed for any of the common parameters such as ramp up or ramp down times and click next. Now your drive has been successfully commissioned with the Sinamics V20 Smart Access Module. Maker.io - https://www.digikey.com/en/maker DigiKey’s Blog – TheCircuit: https://www.digikey.com/en/blog Connect with DigiKey on Facebook: https://www.facebook.com/digikey.electronics/ And follow us on X: https://twitter.com/digikey DigiKey's Main YouTube channel - https://www.youtube.com/@digikey 00:00 Intro 00:24 Inside the box 00:31 Features 00:52 Demo 02:11 Outro