Slide 1 Slide 2 Slide 3 Slide 4 Slide 5 Slide 6 Slide 7 Slide 8 Product List
Power Metal Strip®

The Power Metal Strip® construction consists of a resistance element of low TCR alloy that is electron beam welded to a copper terminal. This all metal construction does not require a ceramic substrate, like other technologies, but instead uses a resistance element with a large cross-section that is self-supporting. The lines in the resistance element represent the laser trim cuts that enable a flexible range of resistance values and tight tolerances down to 0.1%.

PTM Published on: 2020-07-20