The LTC6362 is well-suited for other applications besides driving SAR ADCs. In the circuit shown on this slide, the LTC6362 drives the LTC2160, a 16-bit 25Msps low power pipeline ADC. The LTC2160 operates on a 1.8V supply, and the LTC6362 is able to match its input range by setting the common mode pin V_OCM to the 0.9V midscale voltage applied to the V_CM pin of the LTC2160. The resistors and capacitors at the output of the LTC6362 provide a single-pole filter with a corner frequency of 1.2MHz. In addition to filtering high frequency noise, this R-C circuit helps absorb the transients that occur when the ADC input sample caps open and close. Driving a 2kHz signal, the amplifier is essentially transparent to the ADC, allowing it to achieve its full performance. Signal-to-noise ratio is measured at 77.0dB, HD2 is -98.9dBc, and HD3 is -102.3dBc.