For healthcare drug delivery devices like infusion pumps or insulin pumps, exact dosing is crucial.
Renesas’ winning combination of drug delivery dosing motors with ISO12207 software provides precision. Motors are typically three-phase brushless DC motors (BLDC) types with a few watts (e.g., using 12 V). For flow sensing, a factory-calibrated sensor or custom sensors may be used. Bluetooth® communication may also be needed to provide an up-to-date GUI via smartphone and additional interfaces, like Ethernet or a (medical-grade) isolated USB. Some end products may also require an uninterrupted power supply (e.g. use of Li-ion cells).
Software following the ISO12207 standard can dramatically reduce time-to-market and development costs. Renesas provides this through its Synergy software package.
Features
- Supports infusion pumps and insulin pumps
- Motor control for BLDC or permanent magnet synchronous motors (PMSM) with analog or Hall sensors/encoders, optional gear (also with high gear ratio)
- Flow measurement options: Integrated sensor or MCU-integrated analog front end (AFE) for custom sensor setup
- Communication: Bluetooth 5, Wi-Fi®, Ethernet (e.g. for infusion pumps), and multiple serial interfaces for optional LTE-NB, isolated USB I/F, etc.
- HMI: LCD (for infusion pump) and touch and/or gesture control, also for sterile environment
- Battery management (e.g. optional 2x Li-ion cell for uninterrupted power supply)
- Synergy software package that follows ISO/IEC/IEEE 12207 standards
- S5D9 MCUs
- 120 MHz Arm® Cortex®-M4 integration with USB HS, Ethernet, and TFT controller
- S7G2 MCUs
- 240 MHz Arm Cortex-M4 integration with USB HS, Ethernet, and TFT controller
- RX23W MCUs
- 32-bit, BT5.0 MCU with enhanced security
- ISL9241 buck-boost battery chargers
- USB-C PD Li-ion battery charger for 2 to 4 cells
- ISL85415 buck-boost battery chargers
- 3 V to 36 V/500 mA output, buck regulator
- ISL85403 buck-boost regulator
- 2.5 A regulator with integrated high-side MOSFET for synchronous buck or boost buck converter
- HIP2103 half-bridge drivers
- 60 V, 1 A/2 A peak, half-bridge driver
- FSx012 sensors
- Solid-state MEMS flow sensor module for liquids and gases
- Compliance with ISO/IEC/IEEE 12207
- Synergy Software SDLC process is based on ISO/IEC/IEEE 12207
- Defines processes for development phases and the transitions between each phase
- Establishes common framework for software lifecycle process
- The core of a many significant safety, control, and medical device standards
- Example: IEC 62304 used for medical device software
- Used by reputable organizations, including the US Department of Defense and NASA
设置
快速交货
免运费
国际贸易术语
支付类型
市场产品
For healthcare drug delivery devices like infusion pumps or insulin pumps, exact dosing is crucial. Renesas’ winning combination of drug delivery dosing motors with ISO12207 software provides precision. Motors are typically three-phase brushless DC motors (BLDC) types with a few watts (e.g., using 12 V). For flow sensing, a factory-calibrated sensor or custom sensors may be used. Bluetooth® communication may also be needed to provide an up-to-date GUI via smartphone and additional interfaces, like Ethernet or a (medical-grade) isolated USB. Some end products may also require an uninterrupted power supply (e.g. use of Li-ion cells).
