Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

AP7366-W5-7 IC REG LIN POS ADJ 600MA SOT25 Diodes Incorporated	180,748 In Stock	1 : ¥3.40000 Cut Tape (CT) 3,000 : ¥0.75885 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	6V	0.8V	5V	-	600mA	80 µA	-	75dB ~ 55dB (1kHz ~ 10kHz)	Current Limit, Enable	Over Current, Short Circuit	-40°C ~ 85°C (TA)	-	-	Surface Mount	SC-74A, SOT-753	SOT-25
LT1529IQ#PBF IC REG LINEAR POS ADJ 3A 5DDPAK Analog Devices Inc.	2,298 In Stock	1 : ¥69.37000 Tube	-	Tube	Active	Positive	Adjustable	1	15V	3.75V	14V	0.95V @ 3A	3A	100 µA	160 mA	62dB (120Hz)	Enable	Over Current, Over Temperature, Reverse Polarity	-45°C ~ 125°C	-	-	Surface Mount	TO-263-6, D2PAK (5 Leads + Tab), TO-263BA	DDPAK-5
MPQ20051DQ-AEC1-LF-Z IC REG LINEAR POS ADJ 1A 8QFN Monolithic Power Systems Inc.	4,201 In Stock	1 : ¥11.73000 Cut Tape (CT) 5,000 : ¥7.01350 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	5.5V	0.8V	5V	0.28V @ 1A	1A	200 µA	700 µA	65dB ~ 33dB (100Hz ~ 1MHz)	Enable	Over Current, Over Temperature, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	Automotive	AEC-Q100	Surface Mount	8-VDFN Exposed Pad	8-QFN (3x3)

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.