Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

ADP7156ACPZ-1.8-R7 IC REG LINEAR 1.8V 1.2A 10LFCSP Analog Devices Inc.	0 In Stock Check Lead Time	1 : ¥70.73000 Cut Tape (CT) 1,500 : ¥40.10444 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	1.8V	-	-	1.2A	8 mA	12 mA	80dB ~ 60dB (1kHz ~ 1MHz)	Enable	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	10-VFDFN Exposed Pad, CSP	10-LFCSP-WD (3x3)
ADP1765ACPZ-R7 IC REG LINEAR POS ADJ 5A 16LFCSP Analog Devices Inc.	2,387 In Stock	1 : ¥167.13000 Cut Tape (CT) 1,500 : ¥105.85573 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	1.98V	0.5V	1.5V	-	5A	17 mA	25 mA	61dB ~ 33dB (10kHz ~ 1MHz)	Enable, Power Good, Soft Start	Current Limit, Thermal Overload	-40°C ~ 125°C (TJ)	Surface Mount	16-WFQFN Exposed Pad, CSP	16-LFCSP (3x3)
TLV1117-18CDCYR IC REG LIN 1.8V 800MA SOT223-4 Texas Instruments	9,379 In Stock 417,292 Marketplace	1 : ¥6.80000 Cut Tape (CT) 2,500 : ¥2.25272 Tape & Reel (TR) 2,120 : ¥1.01963 Bulk	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel® Bulk	Active	Positive	Fixed	1	15V	1.8V	-	1.3V @ 800mA	800mA	10 mA	-	75dB (120Hz)	-	Over Current, Over Temperature	0°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223-4

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.