Voltage Regulators - Linear, Low Drop Out (LDO) Regulators | Power Management (PMIC) | Electronic Components Distributor DigiKey

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LP2985-33DBVR IC REG LINEAR 3.3V 150MA SOT23-5 Texas Instruments	168,322 In Stock	1 : ¥4.25000 Cut Tape (CT) 3,000 : ¥1.51718 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	16V	3.3V	-	0.58V @ 150mA	150mA	95 µA	2.5 mA	45dB (1kHz)	Enable	Over Current, Over Temperature, Short Circuit	-40°C ~ 125°C	Surface Mount	SC-74A, SOT-753	SOT-23-5
AP2202K-3.3TRG1 IC REG LINEAR 3.3V 150MA SOT23-5 Diodes Incorporated	70,883 In Stock 501,000 Factory	1 : ¥3.66000 Cut Tape (CT) 3,000 : ¥0.79104 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	13.2V	3.3V	-	0.35V @ 150mA	150mA	150 µA	2.5 mA	75dB (100Hz)	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	Surface Mount	SC-74A, SOT-753	SOT-23-5
LP38690DT-3.3 IC REG LINEAR FIXED POS LDO 3.3V National Semiconductor	6,867 Marketplace	Unavailable Unavailable in your selected currency	-	Bulk	Active	Positive	Fixed	1	10V	3.3V	-	1V @ 1A	1A	55 µA	100 µA	55dB (120Hz)	-	Over Temperature	-40°C ~ 125°C	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	TO-252-3

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.