Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LM1117IMPX-3.3/NOPB IC REG LIN 3.3V 800MA SOT223-4 Texas Instruments	24,535 In Stock	1 : ¥9.69000 Cut Tape (CT) 2,000 : ¥4.09889 Tape & Reel (TR)	LM1117-3.3	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	15V	3.3V	-	1.2V @ 800mA	800mA	5 mA	10 mA	75dB (120Hz)	-	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223-4
TPS767D301PWP IC REG LIN POS ADJ 1A 28HTSSOP Texas Instruments	5,888 In Stock	1 : ¥56.19000 Tube	-	Tube	Active	Positive	Adjustable (Fixed)	2	10V	3.3V, 1.5 V ~ 5.5 V	-	0.58V @ 1A	1A	125 µA	-	60dB (1kHz)	Enable, Reset	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	Surface Mount	28-PowerTSSOP (0.173", 4.40mm Width)	28-HTSSOP
TPS70302PWP IC REG LIN POS ADJ 24HTSSOP Texas Instruments	281 In Stock	1 : ¥63.42000 Tube	-	Tube	Active	Positive	Adjustable	2	6V	1.22V	5.5V	0.25V @ 1A, -	1A, 2A	250 µA	-	65dB (1kHz), 60dB (1kHz)	Enable, Power Good, Reset, Sequencing	Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	Surface Mount	24-PowerTSSOP (0.173", 4.40mm Width)	24-HTSSOP

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.