Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LT3045IDD#PBF IC REG LIN POS PROG 500MA 10DFN Analog Devices Inc.	2,963 In Stock	1 : ¥79.49000 Tube	-	Tube	Active	Positive	Adjustable	1	20V	0V	15V	0.45V @ 500mA	500mA	20 µA	25 mA	117dB ~ 53dB (120Hz ~ 10MHz)	Enable, Power Good, Soft Start	Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)	-40°C ~ 125°C (TJ)	Surface Mount	10-WFDFN Exposed Pad	10-DFN (3x3)
LT3010MPMS8E#PBF IC REG LINEAR POS ADJ 50MA 8MSOP Analog Devices Inc.	812 In Stock	1 : ¥109.84000 Tube	-	Tube	Active	Positive	Adjustable	1	80V	1.275V	60V	0.55V @ 50mA	50mA	-	-	75dB (120Hz)	Enable	Over Current, Over Temperature, Reverse Polarity	-55°C ~ 125°C	Surface Mount	8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad	8-MSOP-EP
LT3045MPDD#PBF IC REG LIN POS PROG 500MA 10DFN Analog Devices Inc.	2 In Stock	1 : ¥160.50000 Tube	-	Tube	Active	Positive	Adjustable	1	20V	0V	15V	0.45V @ 500mA	500mA	-	25 mA	117dB ~ 53dB (120Hz ~ 10MHz)	Enable, Power Good	Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)	-55°C ~ 125°C (TJ)	Surface Mount	10-WFDFN Exposed Pad	10-DFN (3x3)

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.