Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	PSRR	Control Features	Protection Features	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

AP2112K-3.3TRG1 IC REG LINEAR 3.3V 600MA SOT25 Diodes Incorporated	166,599 In Stock 2,268,000 Factory	1 : ¥2.98000 Cut Tape (CT) 3,000 : ¥0.85712 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6V	3.3V	-	0.4V @ 600mA	600mA	80 µA	65sB (100Hz ~ 1KHz)	Enable	Over Current, Over Temperature	-40°C ~ 85°C	-	-	Surface Mount	SC-74A, SOT-753	SOT-25
TLV1117LV33DCYR IC REG LINEAR 3.3V 1A SOT223-4 Texas Instruments	14,678 In Stock	1 : ¥2.87000 Cut Tape (CT) 2,500 : ¥0.82092 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	1.3V @ 800mA	1A	100 µA	75dB (120Hz)	-	Over Current, Over Temperature	-40°C ~ 125°C	-	-	Surface Mount	TO-261-4, TO-261AA	SOT-223-4
TLV71333PQDBVRQ1 IC REG LINEAR 3.3V 150MA SOT23-5 Texas Instruments	14,015 In Stock	1 : ¥4.35000 Cut Tape (CT) 3,000 : ¥1.52943 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	0.54V @ 150mA	150mA	75 µA	70dB ~ 55dB (100Hz ~ 1MHz)	Enable	Over Current, Over Temperature, Reverse Polarity, Short Circuit, Under Voltage Lockout (UVLO)	-40°C ~ 125°C (TJ)	Automotive	AEC-Q100	Surface Mount	SC-74A, SOT-753	SOT-23-5

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.