Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

MC78L05ACDR2G IC REG LINEAR 5V 100MA 8SOIC onsemi	37,437 In Stock	1 : ¥3.49000 Cut Tape (CT) 2,500 : ¥0.93027 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	30V	5V	-	-	100mA	6 mA	-	49dB (120Hz)	-	Over Temperature, Short Circuit	0°C ~ 125°C	-	-	Surface Mount	8-SOIC (0.154", 3.90mm Width)	8-SOIC
TPS73733DCQR IC REG LINEAR 3.3V 1A SOT223-6 Texas Instruments	6,811 In Stock	1 : ¥12.75000 Cut Tape (CT) 2,500 : ¥5.42350 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	0.5V @ 1A	1A	400 µA	1.3 mA	58dB ~ 37dB (100Hz ~ 10kHz)	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	-	-	Surface Mount	SOT-223-6	SOT-223-6
NCP1117ISTAT3G IC REG LINEAR POS ADJ 1A SOT223 onsemi	11,019 In Stock 16,000 Factory	1 : ¥5.27000 Cut Tape (CT) 4,000 : ¥1.74675 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	20V	1.25V	18.8V	1.2V @ 800mA	1A	-	-	73dB (120Hz)	-	Over Current, Over Temperature	-40°C ~ 125°C (TA)	Automotive	AEC-Q100	Surface Mount	TO-261-4, TO-261AA	SOT-223

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.