Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

TPS74801DRCR IC REG LIN POS ADJ 1.5A 10VSON Texas Instruments	12,478 In Stock	1 : ¥11.73000 Cut Tape (CT) 3,000 : ¥4.98789 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	5.5V	0.8V	3.6V	0.16V @ 1.5A	1.5A	-	-	50dB ~ 30dB (1kHz ~ 300kHz)	Enable, Power Good, Soft Start	Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	Surface Mount	10-VFDFN Exposed Pad	10-VSON (3x3)
TPS7A4901DRBR IC REG LINEAR POS ADJ 150MA 8SON Texas Instruments	5,896 In Stock	1 : ¥24.23000 Cut Tape (CT) 3,000 : ¥12.16195 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	35V	1.194V	33V	0.6V @ 150mA	150mA	100 µA	800 µA	72dB (120Hz)	Enable	Over Current, Over Temperature, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	Surface Mount	8-VDFN Exposed Pad	8-SON (3x3)
TPS70612DBVR IC REG LINEAR 1.2V 150MA SOT23-5 Texas Instruments	2,400 In Stock 81,000 Marketplace	1 : ¥6.65000 Cut Tape (CT) 3,000 : ¥2.54893 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel® Bulk	Active	Positive	Fixed	1	6.5V	1.2V	-	-	150mA	2.55 µA	350 µA	80dB ~ 52dB (10Hz ~ 1kHz)	Enable	Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	Surface Mount	SC-74A, SOT-753	SOT-23-5

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.