Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

S-13A1A33-U5T1U3 IC REG LINEAR 3.3V 1A SOT89-5 ABLIC Inc.	2,318 In Stock	1 : ¥14.86000 Cut Tape (CT) 1,000 : ¥7.31017 Tape & Reel (TR)	S-13A1	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	0.1V @ 300mA	1A	1 µA	90 µA	60dB (1kHz)	Enable	Inrush Current Limit, Over Current, Thermal Shutdown	-40°C ~ 85°C (TA)	Surface Mount	SOT-89-5/6	SOT-89-5
S-1172B18-E6T1U IC REG LINEAR 1.8V 1A 6HSOP ABLIC Inc.	3,161 In Stock	1 : ¥14.86000 Cut Tape (CT)	S-1172	Tape & Reel (TR) Cut Tape (CT)	Obsolete	Positive	Fixed	1	5.5V	1.8V	-	0.15V @ 300mA	1A	1 µA	90 µA	65dB (1kHz)	Enable	Over Current, Thermal Shutdown	-40°C ~ 85°C (TA)	Surface Mount	6-SOIC Variation (0.154", 3.90mm Width), 4 Leads + 2 Fins	6-HSOP
S-13A1D33-E6T1U3 IC REG LINEAR 3.3V 1A 6HSOP ABLIC Inc.	0 In Stock Check Lead Time	1 : ¥15.39000 Cut Tape (CT) 4,000 : ¥7.04757 Tape & Reel (TR)	S-13A1	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	0.1V @ 300mA	1A	1 µA	90 µA	60dB (1kHz)	Enable	Inrush Current Limit, Over Current, Thermal Shutdown	-40°C ~ 85°C (TA)	Surface Mount	6-SOIC Variation (0.154", 3.90mm Width), 4 Leads + 2 Fins	6-HSOP

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.